Latest telephone supplies Tenders | Government telephone supplies Tenders

State Government

CTN :45275009

26 May, 2026 NA

Multi City - Delhi

Tender For auction sale of depot non ferrous scrap - scrapped s&t cables and hdpe ducts. (1)signalling cables copper -1.5sqmm(2c,4c,6c,8c) and 5c 2.5sqmm armoured copper cable. (2) telecom cables : copper telephone (20,50 and 200 pairs)clock pas cctv (co axial), power cables,fiber cables-fots (48 cores and it (6 cores). (3) hdpe ducts -40/50 sqmm dia of both signalling and telecom system. note: (i) minimum quantity to be lifted per day= 9 mt. (ii) total nos. of days for lifting complete lot= 04. i) this item comes under the category of hazardous and other waste and its sale shall be made only to an authorised actual user or authorised waste collector or an authorised disposal facility who have been authorised by state pollution control board/cpcb/ministry of environment, forest and climate change under hazardous and other wastes (management & transboundary movement) rules, 2016. therefore, participating bidders must hold valid authorization/registration certificate from spcb/cpcb/moefcc. this authorization/ registration certificate must be valid both at the time of bidding as well as at the time of lifting of material.ii) firm shall also submit a certificate/undertaking in regard to the total hazardous waste purchased/collected and processed for the current financial year till the time of auction.iii) original authorisation/registration certificate as well as the passbook issued to purchaser by spcb/cpcb along with authorization shall be required to be produced at the time of taking delivery. handing over of the hazardous and other wastes to the purchaser shall be only after making of the entry into the passbook of the purchaser by the depot officer of dmrc custodian.iv) the entire arrangement for transportation of the lot shall be made by the purchaser and the responsibility of safe transport of hazardous and other wastes as per provisions of hazardous & other wastes (management & transboundary movement) rules-2016 shall lie entirely on purchaser.v) the purchaser (receiver) shall also ensure the necessary authorisation for transport from concerned spcbs and this aspect shall be clearly stated in transport manifest (movement document) issued by department of dmrc handing over hazardous and other waste scrap to the purchaser. before taking delivery the purchaser shall submit documents/details to depot officer of custodian to show that (a) in case of transportation of hazardous and other waste for final disposal to a facility existing in a state other than the state where the waste is generated, he has obtained no objection certificate from the spcbs of both the states (b) in case of transportation of hazardous and other waste for recycling or utilisation including co-processing, he has given intimation to both spcbs (c) in case of transit of hazardous and other waste for recycling, utilisation including co-processing or disposal through a state other than states of origin and destination, he has given prior intimation to concerned spcb of states of transit.vi) the purchaser shall also ensure that the transport manifest system (movement document) for hazardous and other waste prepared by the depot officer of dmrc custodian as per provisions of hazardous waste management rules is followed. he will also give an undertaking that the relevant copies of the transport manifest (movement document) (as per colour code prescribed in the hazardous waste management rules shall be duly signed by him as well as by the transporter arranged/nominated by him and proper disposal of each signed copy of the transporter shall be ensured by him as well as by the transporter arranged/nominated by him for lifting the lot. also the acknowledgment copy of the transport manifest (blue copy) shall be provided by him to dmrc within 07 days of lifting a lot.

Central Government/Public Sector

CTN :45205290

26 May, 2026 NA

Dhanbad - Jharkhand

Tender For auction sale of others - disposal of miscellaneous scrap released materials such as:- (1) element zink, qty=3025 kg. (2) poly carbonate lens (white) 213 x 102 mm fl, lens (yellow) 136 mm, lens (red) 140 mm, 13mm fl, lens (green)140 mm, 13mm fl, lens 101 mm green for route, lens 101 mm white, lens white, 127 x 70 mm fl, lens white 213 mm, 102 fl, lens green 92 mm, 16 fl, glass jar for ad cell, styron acrylamide nitrite (san) jar with poly polypropylene lid for awe- z type cell, bulb lamp elect. 12v/25w (3 pin), bulb 12v/33w, qty=1898 kg. (3) tag block, tape steel, tape metallic, tape measuring steel, p g clamp, current regulator, 8 way barrier terminal, digital insulation tester, solar panel, 4w/2w combined potable control telephone, indicator disc type 1000 ohm, c spike, a binding wire, 2 wire cnl telephone, digital multi meter (defective), digital tough tester, 10 swg wire, spray gun (broken), earth tester, power meter with sensor, qty=40 kg. (4) set square paratone 60-45, set square paratone 45-4, pvc flexible pipe 20 mm, fiber optical cable assembly, pvc cable channel 15 mm (plastic), qty=10 kg. (5) double ply tent soldries size 12 x 12, soldries single fly tent 12x12x2"x2", banner flag red, flag hand signal red, flag hand green, qty=221 kg. (6) transformer u type, transformer of sorts, signal transformer 110/12v, 40va, transformer 110/110v, 150 va, transformer 300v/12v, 40va, transformer 110/300 v, 60va, transformer 300 v/100v, 150 va, transformer 110v/300v, 150 va, qty=1371 kg. (7) voltage regulator 5 kva (broken & damaged), qty=01 no. (8) voltage regulator 3 kva (broken & damage), qty=01 no. (9) battery charger of shorts, qty=08 nos. (10) 3 pole lamp holder w/o base, lamp harrican, 3 pole lamp holder with base, lamp petromax baby, 3 pole lamp 12v/24w, hand signal lamp, qty=2604 nos. (11) ct box 100 pair, qty=01 no. (12) relay ac 4f/b, (self type), relay non ac, 4f/b, 2f/b(self type), qty=125 nos. (13) relay ecr lamp proving (on aspect) qecx-51, qty=40 nos. (14) relay ecr lamp proving (off aspect) qecx-52, qty=118 nos. (15) relay plug in type dc-track qt2, qty=108 nos. (16) relay plug in type qt1, qty=19 nos. (17) over load relay with time delay of 69 sec (timer 1010), qty=85 nos. (18) relay p1-150 & 150a, (4f/2b, 4f/1b), 24v dc, qty=532 nos. (19) relay of sorts timer relay, relay qucx-1, relay qsra1(8f/8b), esra-1 (8f/4b), relay qfpr1, qty=733 nos. (20) dc track relay rtd 02-0.5v (hm) 2f/b, qty=78 nos. (21) relay thermal time element (2f/1b), qty=47 nos. (22) relay point contractor nr/or (gn), qty=240 nos. (23) plug board nr/or, hv relay, qty=165 nos. (24) relay p-p1 style 2f/1b)(24 pin per relay), qty=24 nos. location:- dhanbad store (gd-i & ii) & re store under sse/sig/w/dhn.

Central Government / Public Sector

CTN :45284526

01 Jun, 2026 NA

Khurda - Odisha

Tender For supply of mtwe control way station equipment, 48v operated with push button telephone as per rdsospecification no. rdso/spn/tc/66/07 with amendment no. 3 or latest. offered equipment should be compatible with the existing control room equipment installed in khurda road division . [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45302378

04 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of others - total qty.= 1201 nos., description: - smps charger 48v,25a-12 nos., battery charger 12v-5 nos., smr 48v, 12.5a-4 nos., smr 48v,25a-5 nos., charger rectifier-1 no., ups 500va/600va-8 nos., ups 1 kva-12 nos., ups 2 kva-3 nos., ups 3 kva-1 no. inverter 24v-1 no., inverter 1.25 kva-1 no., stabilizer 1kva-2 nos., push button telephone (auto)-128 nos., 4w w/s control telephone-125 nos., 4w w/s dtmf equipment-162 nos., dtmf hq equipment-1 no., 12v,cnl smps pwr pack-37 nos., p.b. desk type electronic magneto telephone-89 nos., 2w/4w portable telephone-13 nos., 19' mux sub-rack-28 nos., mux psu card-63 nos., mux gdt card-31 nos., mux fxs card-39 nos., mux fxo card-12 nos., mux tme card-13 nos., mux lpc card-13 nos., mux e&m card-16 nos., mux dac card-6 nos., modem-200 nos., lan extender-16 nos., fare display board-12 nos., ct box 50 pair-5 nos., ct box 20 pair-28 nos., ct box 10 pair-7 nos., pa amplifier 250w-2 nos., pa amplifier 160w-1 no., pa amplifier 120w-1 no., pa microphone-5 nos., horn speaker-8 nos., optical fiber cable rack (stm)-1 no., btp pannel-9 nos., fiber distribution frame-1 no., optical fiber cable termination box-3 nos., cgdb-35 nos., mdch/pdch-3 nos., tib 5 line-1 no., agdb-1 no., mldb-1 no., sldb-1 no., 12v vhf power pack-2 nos., parabolic anenna-2 nos., 9-u rack-2 nos., coral exchange 256 port with all accessories-1 no., coral exchange with all accessories 512 port-1 no., aria-1000 exchange with all accessories-1 no., empty jar-8 nos., paint drum-12 nos.(remarks - material to be sold on as is where is basis and will be delivered in numbers).

Central Government And Public Sector

CTN :45248197

28 May, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of others - total qty.= 1138 nos., description: - hacksaw frame-1 no., lock(navtal)-1 no., sterup pump-1 no., tools carrier iron-1 no., hand platform trolley roller bearing with angle iron, size-10'x 2'x 1 1/2'-1 no., electronic quartz wall clock - 12''-1 no., ig padlock,50mm-11 nos., ig padlock,40mm-8 nos., tool kit with six items-7 nos., torch light 03 cell capacity(brass & aluminium body)-18 nos., steel piller-2 nos., light weight portable control telephone-116 nos., gas challah-6 nos., driver consisting tools, salson make(tool kit with 9 items)-5 nos., flying insect killer- 1 no., lwp telephone(light weight portable telephone)-65 nos., single position battery charger for gp-328 w/t(tin box type)-56 nos., ig bucket 18 ltr. capacity-5 nos., wedging clamp-50 nos., wall clock-1 no., minor lamp led type with charger(charger-01 no. and minor lamp-03 nos.)-1 set, cloth drying stand steel (folding)size- 2.5 feet-2 nos., table tp food warmer s/s 5 container-1 no., foot massager with supporting stand-1 no., automatic shoe shine machine-2 nos., electric chimney full size model-titan, suction power-1600-2 nos., drinking water cooler,storage capacity-80 ltr. make-usha-1 no., light weight portable control(p.t.phone)-41 nos., drinking water cooler, storage capicity-120 ltr. make-usha-1 no., ig padlock 75 mm galvd-3 nos., ig padlock 65mm(4 lever)-3 nos., tool kit bag with 4 items-1 no., empty gallon (tin) 05 ltr. capacity-3 nos., air pressure gauge-1 no., battery eliminator-1 no., bucket(g.i) 8"-1 no., bucket (g.i (04 gallen capacity)-5 nos., calling bell-1 no., clock office 12"-3 nos., pesto kill fly catcher machine with two florescent tube light-5 nos., room heater-1 no., trolley wheel(iron)-20 nos., clb line box-11 nos., plate half (s/s)-39 nos., plate quarter (s/s)-37 nos., tea stainer-2 nos., thali (s/s)-77 nos., tea spoon (s/s)-48 nos., table spoon (s/s)-8 nos., kettle (s/s)-2 nos., basin wash hand (18 dia) (s/s)-3 nos., desert spoon (s/s)-3 nos., tawa iron-4 nos., fry pan(s/steel)-2 nos., pressure cooker 2 ltr. capacity-1 no., fry pan (aluminium hindolium)-3 nos., jug water (s/steel)-18 nos., katori (s/s) big size (bowel)-33 nos., tea cup (s/s)-30 nos., tumbler (s/s)-96 nos., pan pressure-5 nos., bhati(vegetable cutter)-2 nos., degchi (s/s) 6"-19 nos., karai (handolium) 10"-2 nos., rice pressure cooker-5 nos., steel knife-2 nos., spoon serving (s/s)-24 nos., hawkins pressure cooker (03 ltr. cap.)-6 nos., gunj (s/s) 6"-7 nos., gunj (s/s) 8"-11 nos., gunj (s/s) 10"-5 nos., gunj(s/s) 12"-2 nos., pressure cooker 6.5 ltr.-1 no., frypan steel (copper base)-2 nos., sansi (s/s)-2 nos., kadai (hindolium) 12"-4 nos., panja (rice spoon) s/s-6 nos., dal spoon s/s-6 nos., palta s/s-6 nos., kadahi (s/s) bottom copper base 12"-2 nos., kadahi (s/s) bottom copper base 8"-2 nos., gunj s/s with lid 12"-4 nos., gunj s/s with lid 10"-4 nos., gunj s/s with lid 8"-6 nos., gunj s/s with lid 6"-12 nos., degchi 6 1/2"(s/s)-15 nos., degchi 8"(s/s)-19 nos., degchi 10" (s/s)-10 nos., degchi 6" (s/s)-36 nos., degchi 8" (s/s)-24 nos., degchi 10" (s/s)-14 nos. remarks - material to be sold on as is where is basis and will be delivered in numbers except minor lamp led type with charger(charger-01 no. and minor lamp-03 nos.) in set.

Central Government / Public Sector

CTN :45255485

09 Jun, 2026 NA

Secunderabad - Telangana

Tender For supply, installation and commissioning of pre-wired modular workstation consisting of a single control office customized to equip two sads and two daws systems arranged and installed on a t-shaped modular workstation with integrated cable management systems as per specifications. specifications of modular workstation: 1) the workstation shall each be of 5 feet (l) x5 feet (w) the combined size: 10 feet (l) x 5 feet (w) - 1set, made of 25 mm nfc wood and 1 mm acrylic laminate. 2) the sads displays shall be installed such that the bottom edge of the display is at a height of 5' (approximate) from the floor. these shall be installed preferably along the longer edge of the t and facing the operators, 3) the daws system shall be installed such that it is possible to be used sitting at the workstation. 4) all interconnecting wiring for lan, power supply and telephones shall be done inside the cable management system (powder coated aluminium interlocking extrusions) and adequate ports shall be provided on the work surface. communication accessories: i) lan rj45: 4 nos ii)telephone, rj11 : 4 nos iii) power supply, 5 amp sockets: 6 nos 5) all wires shall be brought out to interface boxes one for power supply and another for the communications cables. these boxes shall be designed to accept connections from the control room circuits. note: design, supply, fitment, installation, testing and commissioning shall have to done by the firm confirming to the pre-wired modular t- shaped workstation standards. material shall confirm to hpl/nfc engineered wood (25mm thickness) as per epd-ies-0012055:002 (s-p- 12055) certification. make: godrej interio/tumbi/greeken/moudulartek or its equivalent. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45265448

03 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For supply of 4 wire dtmf type way station equipment as per spn.no.irs-tc-60/2007 latest withcontrol telephone as per spn.no.irs-tc-38/97 with latest amendment. (4 way dtmf station equipment with control phone) [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45167565

20 Jun, 2026 NA

Nagpur - Maharashtra

Tender For supply of push button telephone with caller id. tech. sech:- 1) gr/tel /07/02 with amnd. -1 or latest. general feature: 1) having dtmf/fsk compatible. 2) 80 incoming call memory 3) 24 out going callmemory 4) caller id 5) digital volume control speaker phone as per tech. sepc. gr/tel/07/02 with amnd-1 or latest as per drg.no. na [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45183745

28 May, 2026 NA

Kota - Rajasthan

Tender For supply of 2w/4w light weight portable control telephone as per rdso spec no.irs-tc-78/2020 ver 1.1 or latest. note:-(item reserved for rdso approved source with item id: 3100112 sub item |d 3100112001) note:-(item reserved for rdso approved source with item id: 3100112) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45117924

21 May, 2026 NA

Bengaluru - Karnataka

Tender For supply of 4 wire/2 wire combined portable control telephone as per specn. no. irs:tc 78/2020 [ warranty period: 30 months after the date of delivery ]

Telephone Supplies Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors